Add to Cart
The LY-Ku-3D-I Two-Dimensional Phased Array Radar adopts a phased array system with TWS (Track While Scan) and TAS (Track And Scan) modes for target detection and tracking. TWS meets general wide-area surveillance requirements, while TAS enables high-data-rate continuous tracking of critical targets. It is designed to search, detect, and track low-altitude, slow-moving small drones (e.g., UAVs), measure target parameters, and provide data to other
Advanced System Design: Software-defined, reconfigurable architecture.
Flexible Scanning: Customizable scanning zones with high time-resource efficiency.
Dual Modes:
Single-array phased scanning + full-space mechanical scanning.
Four-array phased scanning for full-space coverage.
Compact & Reliable: High integration, low cost, lightweight, and robust performance.
High-Priority Tracking: Enhanced data rate for critical targets.
| Category | Parameter | Details |
|---|---|---|
| Operating Frequency | Ku-band | |
| Detection Range | Target Capacity | 200 targets |
| Max Detection Distance | ≥5 km (2D phased scan mode, RCS=0.01m², extendable) | |
| Min Detection Distance | ≤200 m | |
| Altitude Coverage | ≥1000 m (for targets with 2m² RCS) | |
| Azimuth Range | Phased scan: -45° to +45°; Mechanical scan: 0° to 360° | |
| Elevation Range | -10° to +50° | |
| Detection Accuracy | Distance (RMS) | ≤20 m |
| Azimuth (RMS) | ≤0.6° | |
| Altitude (RMS) | ≤0.9° | |
| Detection Capability | Distance Resolution | 15 m |
| Azimuth Resolution | ≤4° | |
| Altitude Resolution | ≤6° | |
| Data Rate | 6s (TWS normal mode), 2s (TWS small-target mode), 0.5s (TAS mode) | |
| Detection Probability | 0.8 | |
| False Alarm Rate | 10⁻⁶ | |
| Track Initiation Time | ≤3 frames | |
| Data Processing | Processing Delay | ≤1s (from target detection to data output) |
| Operational Performance | Power Supply | AC (220V±10%, 50Hz±5%) or portable generator |
| Power Consumption | ≤650 W | |
| MTBF (Reliability) | ≥1000 hours | |
| MTTR (Maintainability) | ≤30 minutes | |
| BIT Fault Detection Rate | ≥95% | |
| Environmental Adaptability | Operating Temperature | -35℃ to +50℃ (outdoor equipment) |
| Storage Temperature | -45℃ to +65℃ | |
| Humidity Resistance | 98% RH (at 35℃ for outdoor equipment) | |
| Protection Level | IP-rated three-proof capabilities (waterproof, dustproof, corrosion-resistant) | |
| Mobility & Deployment | Transport & Installation | Compatible with standard vehicles, modular design for flexible assembly, |
| elevator/hoisting installation for rooftop deployment |

